Partner Manufacturers - Product Information

MC-PN-10100TXFX-2SM Media Converter 10-100 BaseTX-10-100 FX Fibre (RJ45-SC Singlemode 15K Range )

Description:
This range of Media Converters cover the most general network requirement requests of 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.

This range are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.

Features:
Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
• Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
• One Fiber-optic, 1310nm wavelength, connector-type and distance vary with different models.
Multimode typical 2KM
Singlemode 15 KM Std. other versions available

　- FT-806A20: Tx-1310nm, Rx-1550nm
　- FT-806B20: Tx-1550nm, Rx-1310nm
• Data Transfer Rate:
　- TP: 10/100Mbps
　- FX: 100Mbps
• Duplex mode support:
　- Full or half-duplex mode by Auto-Negotiation (TP)
　- Full or half-duplex mode by DIP-switch (FX)
• LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
• DIP-switch: 2 DIP-switches
　- Rear DIP-switch: FX duplex mode selection
　- Side DIP-switch: LFP (Link Fault Pass-through) mode selection

Media Converters typical Setup

Specification:
Part Codes MC-PN-10100TXFX-x models of FT-80x Series
Manufacturer Planet Technology Corp
Product Range FT-80x Series
Protocol IEEE 802.3u, 100Base-FX, 100Base-TX
Dimension (W x D x H) 97 x 69 x 26 mm
Weight 0.2kg
Power 5V DC, 2A, max.
Connectors and Cables
Twisted Pair / STP RJ45, Category 5 (EIA/TIA 568)
Fiber-optic MC-PN-10100TXFX-1 / FT-801 : ST / Multi-mode / 220m~550m
MC-PN-10100TXFX-2 / FT-802 : SC / Multi-mode / 220m~550m


MC-PN-10100TXFX-2SM 1FT-802S15 : SC / Single Mode / 15km
Multi-mode cable 50/125, 62.5/125 µm
Single-Mode (SM) cable 9/125 µm
Supported Distances and function
Twisted Pair STP 100 m / 328 ft.
Multi-mode Fiber Optic 412 m / 1,350 ft. (Half-Duplex)
2 km / 1.2 mile. (Full-Duplex)
Single-Mode (SM) 412 m / 1,350 ft. (Half-Duplex)
15 km / 9 mile. (Full-Duplex)
35 km / 21 mile. (Full-Duplex)
50 km / 31 mile. (Full-Duplex)
Port Mode TP: Half and Full Duplex, auto-negotiation
FX: Half and Full Duplex via DIP switch
Environmental
Temperature 0~50 Degree C
Humidity 5-90% (non-condensing)