Partner Manufacturers - Product Information

SDSC-RX925 Smart-e HDMI Receiver Unit - with IR RS232 for use with TX1150

SDSC-RX925 Reciever front and rear

Description:
SDSC-RX925 Receiver Unit Only

The SDSC-RX925 is a flexible and cost effective HDBaseT receiver solution for extending HDMI, bi- directional IR, full duplex RS232 together with POC (remote power over cable). The unit is very
compact and comes with the IR accessories. By incorporating an extended HDBaseT technology, 4K
UHD HDMI signals can be transmitted up to 120m and 1080p @60Hz video up to 150m using CAT
6/6A STP/FTP.

The SDSC-RX925 is a HDBaseT receiver unit capable of accepting UHD HDMI signals up to 4K UHD resolutions. Implementing a special extended version of the HDBaseT specification, the
extender also provides the pass through of wide band bi-directional InfraRed signals and full duplex RS232 up to 115Kbaud. Whilst POC power (24V) can be sent by either the TX or RX through theCat 6/6A cable to provide power to the remote end. All that is required is a single Cat 6/6A cable connection to provide all these features. The SDSC-RX925 receiver has an analogue stereo audio output replicating the de-embedded audio
from the HDMI signal.


The (SDSC-RX925) decodes the HDBaseT protocol back to HDMI and IR/RS232. Power is provided from the transmitter through the same Cat cable so there is no need for bulky PSUs at the display end. A secure lockable DC connector on the splitter provides a reliable power connection. A local audio output is available on the transmitter together with an audio output on each receiver allows for various sound requirements.


To be used with the compatible Smart-e TRANSMITTER: SDSC - TX1150

Features:
· HDBaseT technology
· HDMI 2.0 4K@60Hz
· 4:4:4, 18G, HDR10, Dolby Vision
· HDCP 2.2/1.3 compliant
· Looping inputs for transmitter
· Full duplex RS232 pass through
· Bi-directional IR pass through


· 150m @1080p, 120m @4K
· Single CAT 6/6A STP/FTP
· CEC compliant
· Analogue audio out on receiver
· Secure DC connection
· POC (remote powering receivers)
· Slim profile 18mm

SDSC-TX1150-RX925 SETUP EXAMPLE

Specification:
Video – Digital
Connectors HDMI (Type A)
Signal type HDMI - TMDS
Standards HDMI 2.0. HDCP 2.2/1.4
Maximum data rate 4.5Gbps per colour
Maximum pixel clock 340MHz
Resolution range - DTV Max 4096x2160 @60Hz 36 bit colour depth
Resolution range - PC Max 1920x1200 @60Hz 24 bit colour depth
Frame rate 24, 25, 30, 50 & 60 Hz
Gain 0 dB
Formats RGB and YCrCb
Colour space 4:4:4, 4:2:2 & 4:2:0
Clock jitter <0.15T bit
Rise time <0.3T bit (20-80%)
Fall time <0.3T bit (20-80%)
Maximum transmission delay 5ns (+/- 1ns)
Signal strength TMDS +/- 0.4V pk-pk
TMDS signal level 2.9V – 3.3V
Impedance 50R
Maximum DC offset 15mV
Maximum input cable length 15m 24 AWG
Maximum output cable length 15m 24 AWG

Audio – Digital
Standards Embedded within the HDMI signal, SPDIF
Maximum audio channels 8
Maximum sample rate per channel 192 kHz
Sample size 16-24 bits
Audio – Analogue
Standards Stereo - unbalanced
Bandwidth 20 - 20 kHz
Connector 3.5mm stereo jack socket

Power
DC Voltage External24V PSU
DC connector 2.1mm jack with screw fitting
AC Voltage (External Supply) 100-230 VAC
AC frequency (External Supply) 50/60 Hz
Power consumption 9W (max)/1.2W (standby)
Operating temperature 0-40 degrees C
Storage temperature -20-60 degrees C
Relative humidity 20-90%
Dimensions (each unit) 140x65x18mm
Product weight 0.16Kg
MTBF 30,000 hours










Note: Because of the Digital Stream Compression system the protocol might not be compatible with direct HDBaseT inputs on displays and projectors.