Partner Manufacturers - Product Information

SDSC-TX1150 Smart-e 1-4 Output HDBaseT Splitter Unit Only - 4K60 Hz 4:4:4 UHD HDR10 1080p 150/120M +RS232 18Gbps

SDSC-TX1150 FRONT AND REAR

Description:
The Smart Digital Solutions SDSC-TX1150 is a 1 in and 4 out HDBaseT splitter capable of transmitting 1080p/4K UHD signal over 150/120m of structured cabling to 4 remote displays. Additional features include RS232 and Infrared pass-through together with local audio output.


The SDSC-TX1150 has a single HDMI input which can be connected at the rear of the unit where it gets split internally and then fed to 4 separate HDBaseT outputs. Each receiver (SDSC-RX925) decodes the HDBaseT protocol back to HDMI and IR/RS232. Power is provided from the transmitter through the same Cat cable so there is no need for bulky PSUs at the display end. A secure lockable DC connector on the splitter provides a reliable power connection. A local audio
output is available on the transmitter together with an audio output on each receiver allows for various sound requirements. Each HDBaseT connection also allows for RS232 signals to be received back from the receiver enabling remote control of the source device. Fully HDCP 2.2 compliant this SDSC-TX1150 compact unit is ideal for digital signage use in Education, Entertainment and Retail Market


Note: Because of the Digital Stream Compression system the protocol might not be compatible with direct HDBaseT inputs on displays and projectors.

OTHER SYSTEM PARTS:
To be used with up to 4 of the compatible Smart-e RECIEVERS: SDSC-RX925

Also see compatible rack kit :
SDSC-RACK-1U

Features:
· HDBaseT technology
· HDMI 2.0 4K@60Hz, 4:4:4, 18Gbps
· HDR 10, HDR10+, Dolby Vision, HLG
· HDCP 2.2/1.3 compliant
· 1– 4 HDBaseT splitter
· 150m Cat6 extension—HDBaseT
· Looping HDMI input

· RS232 pass-through
· Dolby TrueHD, DTS-HD Master Audio
· Local audio output
· Remote powers the receivers (POC)
· Lockable DC connector
· EDID management
· IR passthrough

SDSC-1150 WITH RX925 Setup

Specification:
TECHNICAL SPECIFICATION
specifications are subject to change without notice
Video – Digital
Connectors 2 x HDMI (Type A) input/output
Signal type HDMI - TMDS
Standards HDMI 2.0. HDCP 2.2/1.4
Maximum data rate 4.5Gbps per colour
Maximum pixel clock 340MHz
Resolution range - DTV Max 4096x2160 @60Hz 36 bit colour depth
Resolution range - PC Max 1920x1200 @60Hz 24 bit colour depth
Frame rate 24, 25, 30, 50 & 60 Hz
Gain 0 dB
Formats RGB and YCrCb
Colour space 4:4:4, 4:2:2 & 4:2:0
Clock jitter <0.15T bit
Rise time <0.3T bit (20-80%)
Fall time <0.3T bit (20-80%)
Maximum transmission delay 5ns (+/- 1ns)
Signal strength TMDS +/- 0.4V pk-pk
TMDS signal level 2.9V – 3.3V
Impedance 50R
Maximum DC offset 15mV
Maximum input cable length 15m 24 AWG
Maximum output cable length 15m 24 AWG

Audio – Digital
Standards Embedded within the HDMI signal & SPDIF
Maximum audio channels 8
Maximum sample rate per channel 192 kHz
Sample size 16-24 bits
Audio – Analogue
Standards Stereo - unbalanced
Bandwidth 20 - 20 kHz
Connector 3.5mm stereo jack socket


Power
DC Voltage External24V PSUs
DC connector 2.1mm jack with screw fitting
AC Voltage (External Supply) 100-230 VAC
AC frequency (External Supply) 50/60 Hz
Power consumption 35W
Operating temperature 0-40 degrees C
Storage temperature -20-60 degrees C
Relative humidity 20-90%
Dimensions 220 x 130 x 40mm
Product weight 0.5Kg
MTBF 30,000 hours


To be used with upto 4 of the compatible Smart-e RECIEVERS: SDSC-RX925

Also see compatible rack kit :
SDSC-RACK-1U


Note: Because of the Digital Stream Compression system the protocol might not be compatible with direct HDBaseT inputs on displays and projectors.