Partner Manufacturers - Product Information
.png){kind=small}
RTL-5309166 - VXIT Rittal Rack - 42U 800Wx1000D Network/server rack VX IT with vented doors, "Pre-configured" with Side Panels 482.6 mm (19") mounting angles, standard, HD - 15,000 N Rated (VXIT-5309.116)
Rittal VX - IT Server Rack - Pre Configured
Description:
Pre Configured
Network/server rack VX IT with vented doors, "Pre-configured" with Side panels screw fix type single piece,
482.6 mm (19") mounting angles, standard, HD - 15,000 N Rated (VXIT-5309.116)
VX IT network/server enclosure, vented, for room climate control. Supplied pre-assembled with a selection of practical equipment. 482.6 mm (19") interior installation with depth-variable 482.6 mm (19") mounting angles in the standard version, fitted at the front and rear.
The solution for all network and server applications. Whether you need a network rack to house a distribution board, or server racks for an edge, colocation or hyperscale data centre, the new VX IT is the ideal platform for accommodating a modern IT infrastructure and its many different requirements. The new VX IT is based on a modular concept with a customer-friendly configurator to guide you quickly and easily to a solution that is tailored to your individual requirements.
Features:
Pre Configured
Network/server rack VX IT with vented doors, "Pre-configured" with Side panels screw fix type single piece,
482.6 mm (19") mounting angles, standard, HD - 15,000 N Rated (VXIT-5309.116)
CONFIGURED SPEC:
VX enclosure frame with doors and roof plate
Aluminium/sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges
Sheet steel rear door, vented (vented surface area approx. 85% perforated), vertically divided, 180° hinges
Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E
482.6 mm (19") mounting angle, standard, variably screw-fastened to depth stays at the top and bottom
Side panels, one-piece, for screw fastening
Roof plate, multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate
Base module mounted at front as infill panel
Base/plinth system VX, 100 mm, vented
Base/plinth corner pieces and trim panels, sides, screw-fastened
Base/plinth trim panels, front and rear plus corner and baying covers supplied loose
4 levelling feet, M12, including base/plinth adaptor (supplied loose)
Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out.
12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose)
25 multi-tooth screws, conductive (supplied loose)
4 combination rails for inner and outer mounting level, to fit rack depth (supplied loose)
10 cable shunting rings, metal, 125 x 65 mm (supplied loose)
IPPC pallet
Base module mounted at front as infill panel, depth 75 mm
Specification:
VX IT, 19" mounting angles, standard, front and rear, vented, WHD: 800 x 2100 x 1000 mm, 42 U, pre-configured
VX 5309.166
Material
Sheet steel
Aluminium
Plastic
Surface finish
Enclosure frame: Dipcoat-primed
Interior installation: Spray-finished
Rear door and roof: Dipcoat-primed, powder-coated
Front door: Aluminium, anodised/spray-finished
Colour
Enclosure frame, rear door and roof: RAL 7035
Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005
Interior installation, vent grille at the front, base/plinth: RAL 9005
Handle and hinges: RAL 9005
Supply includes
VX enclosure frame with doors and roof plate
Aluminium/sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges
Sheet steel rear door, vented (vented surface area approx. 85% perforated), vertically divided, 180° hinges
Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E
482.6 mm (19") mounting angle, standard, variably screw-fastened to depth stays at the top and bottom
Side panels, one-piece, for screw fastening
Roof plate, multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate
Base module mounted at front as infill panel
Base/plinth system VX, 100 mm, vented
Base/plinth corner pieces and trim panels, sides, screw-fastened
Base/plinth trim panels, front and rear plus corner and baying covers supplied loose
4 levelling feet, M12, including base/plinth adaptor (supplied loose)
Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out.
12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose)
25 multi-tooth screws, conductive (supplied loose)
4 combination rails for inner and outer mounting level, to fit rack depth (supplied loose)
10 cable shunting rings, metal, 125 x 65 mm (supplied loose)
IPPC pallet
Base module mounted at front as infill panel, depth 75 mm
Dimensions
Width: 800 mm
Height: 2,000 mm
Depth: 1,000 mm
Units
42 U
Height including base/plinth
2,100 mm
Free mounting space to the 482.6 mm (19") level, front/rear
87 mm / 193 mm
Distance between levels as delivered
720 mm
Design
Pre-configured
Cover version
multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate
Mounting angle version
482.6 mm (19") mounting angles, standard in the VX IT
Base design
Base module mounted at front as infill panel
Load capacity
15,000 N
Max. load capacity (static) per enclosure to UL 2416
12,000 N
Note
Depending on how and where it is sited, the door opening angle may vary for selected applications
Basic material
Sheet steel
Construction rear door
Sheet steel door, vented, vertically divided, 180° hinges
Construction front door
Aluminium/sheet steel door, vented, one-piece, 180° hinges
Packs of
1 pc(s).
Weight/pack
155 kg
EAN
4028177945128
ETIM 7.0
EC002499
ECLASS 8.0
27180207
______________________
This product is also available in standard form without sides
SEE Part N0. RTL-5309116
.png){kind=small}
.png){kind=small}
