Partner Manufacturers - Product Information

DN-150-RX - DVIGear - DisplayNet® AV Solution: Matrix Switch, Video Wall & Extender. (DN-150 Series) AV Receiver

DN-150-RX (AV Receiver)

Description:
Unprecedented Value – The DisplayNet DN-150 Series represents a major breakthrough in performance and value for IP-based AV signal distribution applications. The DN-150 Series utilizes cutting edge SDVoE technology in a fanless, low-profile case that can be mounted unobtrusively nearly anywhere. Based on the latest SDVoE standard, the DN-150 Series delivers unconstrained scalability, fast switching, zero frame latency and zero artifact image quality, while distributing signals with resolutions of up to 4K/60p (4:4:4) with 8-bit color, or 4K/60p (4:2:2) with 10 or 12-bit color. Like other DisplayNet products, these units provide independent multi-layer routing of HDMI audio and video signals, as well as IR, RS-232, Analog Audio, and 1GbE.

Exceptional Versatility – The DN-150 Series relies on the highly intuitive DisplayNet Manager® user interface that makes set-up and maintenance of these units incredibly fast and easy. Advanced features in this web-based application enables nearly effortless integration with third-party controllers. Full interoperability with other SDVoE products, including the DisplayNet DN-200 Series, greatly enhances system flexibility. The DN-150 Series is available with either copper or optical fiber transport, enabling signal extension distances of up to 100 meters (328 ft.) with CAT-6A twisted pair and up to 30 KM (18.6 miles) with single-mode fiber.

Features:
• Next-generation AV signal distribution with Zero Artifacts and Zero Frame Latency
• Supports resolutions of up to 4K /60p with 8-bit color (4:4:4) or 4K /60p with 10 or 12-bit color (4:2:2 or 4:2:0)
• Independent multi-layer routing for HDMI Video, HDMI Audio, Analog Audio, RS-232, IR, and HDMI-CEC commands.
• Highly Scalable – supports systems from a few ports to hundreds – limited only to the size of the network switch
• Long Range – up to 100 meters (328 ft.) using CAT-6A cabling. Optical version supports up to 30KM (18.6 miles)
• Fully HDCP 2.2 and 1.4 compliant
• Compatible with SDVoE-compliant transmitters and receivers, including DisplayNet DN-200 Series.

Specification:
Benefits:

• Leverages decades of proven networking technology and massive global deployment of 10GbE networks
• AV assets no longer need to be aggregated at a central location using an expensive AV Matrix Switcher
• Eliminates the need for costly, redundant AV networks as all AV assets can now reside on existing IT networks
• Enables IT Managers to easily manage and distribute AV assets within corporate network environments
• 10GbE network switches can be up to 60% smaller than typical AV switches and up to 1/10th the cost
• Scalable – system array limited only by the number of installed endpoints and size (ports) of 10GbE switch
• High-speed uplinks on many 10GbE switches allow increased port capacity without obsoleting existing hardware
• Embedded Local Management – DisplayNet auto-configures all connected devices even in the most complex networked systems, thus eliminating the need for complicated network switch configurations
• Interoperability with all SDVoE-compliant devices and control systems
• Most DN-200 Series features supported with DN-150 Series TX and DN-200 Series RX

Performance:

Supported Resolutions (2) Up to 4K /60p with 8-bit color (4:4:4)
Up to 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0)
Maximum Pixel Clock Freq. Supports pixel clock rates up to 600 MHz
Maximum Video Bit Rate Supports digital signal bit rates up to 6.0 Gbps./color, 18.0 Gbps. total
Switching Layers Independent switching layers for all connected Video, Embedded Audio, Analog Audio, Downmixed Audio (output only), RS-232 and IR
Video Signal Latency (3) Genlock Mode: ≤ 30 µsec. (uncompressed), ≤ 120 µsec. (compressed) (3)
Supported I/O Switching Array Size of I/O array is limited only by the size (number of ports) of the 10GbE network switch
Recommended CAT Cable CAT-6A S/FTP (500 MHz) AWG 23, or CAT-7 (Europe); Compliant with TIA/EIA-568B termination standard
Maximum Cable Distance up to 328 ft. (100 meters) using CAT-6A S/FTP (500 MHz) AWG 23 cable, or up to 18.6 miles (30 KM) with DN-150F optical version
HDMI Input Cable Equalization Supports DVIGear's SHR™ Series HDMI with cable lengths up to 15 meters at 4K /30p resolution

Operational Modes:

(Matrix Switching Mode)
• Fully non-blocking cross-point routing of nearly any size I/O array – only limited by size of 10GbE switch.

(Video Wall Mode)
• DN-150-TX devices may be used with DN-200 Series RX devices in Video Wall mode

(Point-to-Point Mode)
• Supports Point-to-Point Extension up to 328 ft. (100 meters), or up to 18.6 miles (30 KM) with DN-150F optical version

Click here for further information