Partner Manufacturers - Product Information

DXS-3610-54S/SI D-Link 48 SFP Ports plus exp 6 Port 100G SFP Ports Layer3 Managed Network Switch

Description:
Layer 3 Stackable 10G / 100G Managed Switch
DXS-3610-54S High 48 port density 10G:

DXS-3610-54S providing 48 x 10G SFP+ Ports and 6 x 40/100Gb QSFP+/QSFP28 Ports.






The DXS-3610 Layer 3 Stackable 10G/100G Managed Switches are compatible with SDN-enabled network architecture for deployment in high-performance data centre, enterprise and campus applications. Hot-swappable PSU and fan modules with load sharing capabilities significantly reduce network downtime and power consumption. The new switches are stackable up to 12 units per stack and with ultra-high port density counts making the DXS-3610 Series the ideal choice for future-proofing any aggregation or core network.

The DXS-3610 Series boasts high-performance switching capacity of up to 2.16 Tbps with forwarding rates of up to 1607 Mpps. It also features a modular fan back-up design, providing n+1 redundancy for the system. The modular power design allows either AC or DC power sources for maximum deployment flexibility. With dual power modules, power loads are distributed seamlessly across both modules, significantly extending the lifetime of the modules and saving costs, providing reliability and redundancy simultaneously.

The ability to stack up to 12 x DXS-3610 Switches with up to 1200G (1.2T) of stacking bandwidth makes them ideal for data centres across a broad spectrum of businesses, including enterprise or campus applications using leaf-spine or top-of-rack (ToR) architectures.

The DXS-3610 Series also has an optional licence upgrade allowing full MPLS support across the platform if required.

Features:
- 48 x 10 Gigabit SFP+ + 6 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28
- Stack up to 12 switches (up to 1.2 Tbps stacking bandwidth)
- OpenFlow 1.3 compliance for SDN-enabled network compatibility
- Modular PSU (1+1) and fan (N+1) with load sharing capabilities
- Switch locator LED and ID tag for maintenance convenience
- Upgradable license for full L3 and MPLS applications

Specification:
Spec: DXS-3610-54S/SI:
General
Device Type Switch - 54 ports - L3 - Managed - stackable
Enclosure Type Front to back airflow rack-mountable 1U
Subtype 10 Gigabit Ethernet
Ports 48 x 10 Gigabit SFP+ + 6 x 40 Gigabit QSFP+ / 100 Gigabit QSFP28
Performance Switching capacity:2.16 Tbps
Forwarding rate:1.60704 Gpps
Capacity Packet buffer size:32 MB
IPv4 routes (static):up to 32000
IPv6 routes (static):up to 16000
IPv4 forwarding entries:up to 144000
IPv6 forwarding entries:up to 144000
MAC Address Table Size 288K entries
Jumbo Frame Support 9216 bytes
Routing Protocol RIP-1,RIP-2,BGP,IGMPv2,IGMP,OSPFv2,PIM-SM,PIM-DM,IGMPv3,OSPFv3,PIM-SSM,DVMRPv3,MLDv2,MLD,VRRPv2,MPLS,VRRPv3,MSTP,RSTP,STP
Remote Management Protocol SNMP 1,RMON 1,RMON 2,SNMP 3,SNMP 2c,CLI,SMTP
Encryption Algorithm SSL,TLS 1.2
Authentication Method RADIUS,TACACS+,Secure Shell v.2 (SSH2)
Features DoS attack prevention,SNTP support,sFlow,DHCP snooping,Quality of Service (QoS),MPLS VPN,LLDP support,DNS relay,Virtual Routing and Forwarding (VRF),Neighbor Discovery Protocol (NDP),Virtual Circuit Connectivity Verification (VCCV),Generic VLAN Registration Protocol (GVRP),SNMP support,Generic Routing Encapsulation (GRE),Type of Service (ToS),DiffServ Code Point (DSCP) support,Ethernet Ring Protection Switching (ERPS),5 fans,OpenFlow support,Virtual Private LAN Service (VPLS),Priority-Based Flow Control (PFC),Bridge protocol data unit (BPDU),Label Distribution Protocol (LDP),Ethernet Ring Protection Switching (ERPS) v2,Weighted Deficit Round Robin (WDRR),Switch Resource Management (SRM),LLDP-MED,Ethernet OAM,Weighted Round Robin (WRR),MAC based VLAN,loopback detection,port-based VLAN,D-Link Discovery Protocol (DDP),Committed Information Rate (CIR),Microsoft Network Load Balancer (NLB)
Compliant Standards IEEE 802.1D,IEEE 802.1Q,IEEE 802.1w,IEEE 802.1x,IEEE 802.1s,IEEE 802.3ah,IEEE 802.1v,IEEE 802.1ag,IEEE 802.1AX,IEEE 802.1Qbb,ITU-T Y.1731
Expansion / Connectivity
Interfaces 48 x 10GBase-X SFP+
6 x 100Gbit/40Gbit LAN QSFP28/QSFP+
1 x console RJ-45
1 x management (Gigabit LAN) RJ-45
1 x alarm
1 x micro-USB 2.0 Type A
Power
Power Device Internal power supply - hot-plug
Installed Qty 2 (installed) / 2 (max)
Power Redundancy Yes
Power Redundancy Scheme 1+1
Voltage Required AC 120/230 V (50/60 Hz)
Power Consumption Stand by 120.6 Watt
Miscellaneous
Included Accessories 4 rubber feet,2 x 19" mounting brackets
Cables Included 1 x console cable
1 x micro-USB cable
Rack Mounting Kit Included
MTBF 94,262 hours
Compliant Standards VCCI,C-Tick,cUL,CB,IC,FCC,LVD
Dimensions &Weight
Width 44.1 cm
Depth 48.744 cm
Height 4.35 cm
Weight 9.8 kg
Environmental Parameters
Min Operating Temperature 0 °C
Max Operating Temperature 45 °C
Humidity Range Operating 0 - 95% (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 70 °C
Humidity Range Storage 0 - 95% (non-condensing)


Product data is provided by CNET, we do not warrant the accuracy and completeness of the material contained in this data sheet