Partner Manufacturers - Product Information

RTL-7888808 TX CableNet - Glazed 24U 800Wx800D, Rittal Network rack TX CableNet, glazed door, with side panels - glass front door (TX 7888.808) PREMOUNT *NEW*

Pre-configured - TX CableNet Network Rack (with side panels)

Description:
The TX CableNet – places extra space at your disposal by avoiding the problem of unnecessarily wide or deep IT racks. This IT network rack is thus also suitable for use in smaller IT environments and is already optimally prepared for individual interior installation.

TX CableNet – Taking cable management to a new level IT network rack, preconfigured with essential cable routing components, prepared for individual interior installation. IT rack, comprising a torsionally rigid, welded, and symmetrical frame of rolled, 16-fold vertical sections connected with a horizontal frame at the bottom and horizontal cross rails with welded roof plate at the top. All frame sections with integrated system punching in a 25 mm pitch pattern permit convenient interior installation through simple attaching and fastening of the installation components. All section edges are rounded. The vertical frame sections each possess two mounting levels offset in the depth and width directions, which can be used individually for flexible mounting of the components. Enclosures can be bayed to the front and rear, as well as to the sides.

Load capacity: up to 500 kg.

Features:
Benefits

New roof plate concept: When cabling, the depth is utilised in full, plus optional integration of a fan module
Efficient frame concept for individual configuration
Side panels, screw-fastened for rapid access
482.6 mm (19") mounting angles, variable in the width and depth, with possibility for asymmetrical interior installation

TX Cablenet

Specification:
TX 7888.808
New version, Pre-configured with side panels

Product description
Optimum IT rack solution for use in tight spaces, in rooms with low ceilings or wherever accessibility is otherwise restricted.No power losses due to unused rack space in case of population with exclusively small electrical components.

Material
Enclosure: Sheet steel
Door: Sheet steel, 1.2 mm
Side panel: Sheet steel, 1.2 mm
482.6 mm (19") mounting angles: Sheet steel, 2 mm
Surface finish
Enclosure frame: Dipcoat-primed
Enclosure panels: Dipcoat-primed, powder-coated

Colour
RAL 7035

Supply includes
Enclosure with glazed front door and rear door
Side panels, screw fastened
482.6 mm (19") mounting angles
Roof plate, screw-fastened, with concealed cable entry at the left and right sides, prepared for fan mounting.
Base/plinth vented, 100 mm high
Brush strip
50 multi-tooth screws M5, cage nuts M5, conductive (supplied loose)
19" combination rail
Cable shunting rings (supplied loose)
Assembly parts

Dimensions
Width: 800 mm
Height: 1,200 mm
Depth: 800 mm
Units
24 U

Distance between levels as delivered
445 mm
Design
Pre-configured
with side panels
Design doors
Glazed door, one-piece
With 3 mm single-pane safety glass
Rear door design
Sheet steel door, one-piece
Front door design
Glazed door, one-piece
Load capacity (static)
500 kg

Protection category to IEC 60 529
IP 20
Basic material
Sheet steel
Packs of
1 pc(s).

Customs tariff number
94032080
EAN
4028177994652
ETIM 8
EC002499
ETIM 7.0
EC002499
ECLASS 8.0
27180207

Product description
TX CableNet, with glazed door, with roof plate, side panels, 19" mounting angles, pre-assembled, WxHxD: 800x1200x800 mm, RAL 7035