Partner Manufacturers - Product Information

CLK-AHCD14-AMAM010 - Rose - CrystalView DP Active Optical Cable, 7680x4320 @60Hz, LSOH, 8K60 4:2:2 *NEW*

CrystalView DP Active Optical Cable

The CrystalView DP Active Optical Cable extends your DisplayPort 1.4 video display at 8K60 with 16-bit HDR up to 330 feet (100 m) away from your computer. The cable embeds all of the optics and electronics into the cable head to provide a sleek and streamlined installation. No external power supply is needed because all of the power is supplied by the DisplayPort interface. The cable is available in fixed lengths: 32.8' (10m) 65.6' (20m) 98.4' (30m) 164.0' (50m)There are so many places where this cable can be used such as in digital signage, presentation venues, hotel and restaurant, medical facilities, retail locations, industrial settings, military sites, and many other environments.It has a low smoke zero-halogen jacket which permits it to be used in plenums, walls, and ceilings. Running in conduit is not required. It is installed and connects just like a copper cable, except it must be installed in the correct direction. It's 4mm jacket size is small and has a low bend radius of less than an inch (20mm). It is rugged with a crush resistance of 400N short term and 200N long term. The cable is a hybrid style with both glass fiber and copper. The high speed video signals with embedded audio are transmitted in fiber with support for DSC (display stream compression). All audio formats are supported including up to 32 audio streams at 1536Khz sampling rate. The DDC, AUX, and hot-plug detect signals are passed through untouched in copper and therefore no setup or any special requirements are needed. The cable is HDCP compliant to all versions.For maximum benefit, pair it with Rose USB 3.1 optical extender cables to make a complete high-speed KVM extension.

Cable with integrated optics to extend DisplayPort 1.4 up to 165 feet (50m)
Direct point-to-point active optical cable plugs directly into your equipment
Available in lengths of 32.8', 65.6', 98.4', and 164.0' (10m, 20m, 30m, and 50m)
Supports resolution of 7680x4320 @60Hz
Supports 16-bit HDR at 8K60 4:2:2
Bandwidth of 32.4 GBps
Plug-and-play no configuration required, plugs in just like a copper cable
Draws its power from the DisplayPort interface, no external power needed
Low smoke zero halogen jacket can be run through plenum or floor-to-floor
Optimum transmission uses glass fiber for high speed signals(video) and copper for low speed signals (AUX, DDC, HPD)
Use two cables in parallel to support Dell Ultra Sharp UP3218K 8K monitor
Supports multi-stream transport
Extremely low EMI or RFI radiation
Very low bend radius of less than an inch (20mm)


Jacket diameter: .16" (4.0mm)
Cable head W x D x H
21mm x 47mm x 9mm + connector

Net weight

10m 250g
20m 460g
30m 670g
50m 1090g


Bus powered from host device
375mW @ 3.3V


Up to 7680x4320 @ 60Hz (DP1.4)
32.4 Gbps


Any format per DP1.4 spec


Any format per DP1.4 spec
Jacket material
LSZH (low smoke zero halogen)
Tensile strength
Long term 100N
Short term 200N
Crush resistance
Long term 200N
Short term 400N
Bend radius
Dynamic 20mm
Static 10mm

Cable conductors

4 glass fibers
5 copper conductors


32.8' (10m)
65.6' (20m)
98.4' (30m)
164.0 '(50m)


DP male with lock(source)
DP male with lock (display)


Operating temperature: 32F122F (0C50C)
Storage temperature: -4F122F (-20C50C)
Relative humidity: 15%85%, non-condensing