Partner Manufacturers - Product Information

CLK-AHCH20-AMAM050 - Rose - CrystalView HDMI Active Optical Cable, 3840x2160 @60Hz, LSOH, 4K60 4:2:2 (50m) *NEW*

CrystalView HDMI Active Optical Cable

The CrystalView HDMI Active Optical Cable extends your HDMI 2.0 video display at 4K60 with 10-bit HDR up to 330 feet (100 m) away from your computer. The cable embeds all of the optics and electronics into the metal cable head to provide a sleek and streamlined installation. No external power supply is needed because all of the power is supplied by the HDMI interface. The cable is available in fixed lengths of: 32.8' (10m) 65.6' (20m) 98.4' (30m) 164.0' (50m) 229.6' (70m) 328.0' (100m)There are so many places where this cable can be used such as in digital signage, presentation venues, hotel and restaurant, medical facilities, retail locations, industrial settings, military sites, and many other environments.It has a low smoke zero-halogen jacket which permits it to be used in plenums, walls, and ceilings. Running in conduit is not required. It is installed and connects just like a copper cable, except it must be installed in the correct direction. It's 4mm jacket size is small and has a low bend radius of less than an inch (20mm). It is rugged with a crush resistance of 400N short term and 200N long term. The cable is a hybrid style with both glass fiber and copper. The high speed video signals with embedded audio are transmitted in fiber. All audio formats are supported including up to 32 audio streams at 1536Khz sampling rate. The CEC, DDC, and hot-plug detect signals are passed through untouched in copper and therefore no setup or any special requirements are needed. The cable is HDCP compliant to all versions. There is no support for ARC or Ethernet in this cable.For maximum benefit, pair it with Rose USB 3.1 optical extender cables to make a complete high-speed KVM extension.

Cable with integrated optics to extend HDMI 2.0 up to 300 feet (100m)
Direct point-to-point active optical cable plugs directly into your equipment
Available in lengths of 32.8', 65.6', 98.4', 164.0', 229.6', & 328.0' (10m, 20m, 30m, 50m, 70m, 100m)
Supports resolution of 3840x2160 @60Hz
Supports 10 bit HDR at 4K60 4:2:2
Bandwidth of 18 Gbps
Plug-and-play no configuration required, plugs in just like a copper cable
Draws its power from the HDMI interface, no external power needed
Low smoke zero halogen jacket can be run through plenum or floor-to-floor
Optimum transmission uses glass fiber for high speed signals(video) and copper for low speed signals (CEC, DDC, HPD)
Passes HDMI DDC signals and CEC signal transparently
Supports HDCP rev 1.4 and 2.2
Extremely low EMI or RFI radiation
Very low bend radius of less than an inch (20mm)


Jacket diameter: .16" (4.0mm)
Cable head W x D x H
17mm x 41mm x 7mm + connector

Net weight

10m 240g
20m 420g
30m 600g
50m 960g
70m 1320g
100m 1860g


Bus powered from host device
250mW @ 5V


Up to 3840x2160 @ 60Hz (HDMI 2.0b)
18.0 Gbps


Any format per HDMI 2.0b spec


Any format per HDMI 2.0b spec
Jacket material
LSZH (low smoke zero halogen)
Tensile strength
Long term 100N
Short term 200N
Crush resistance
Long term 200N
Short term 400N
Bend radius
Dynamic 20mm
Static 10mm

Cable conductors

4 glass fibers
7 copper conductors


32.8' (10m)
65.6' (20m)
98.4' (30m)
164.0 '(50m)
229.6' (70m)
328.0' (100m)


HDMI type A male (source)
HDMI type A male (display)


Operating temperature: 32F122F (0C50C)
Storage temperature: -4F122F (-20C50C)
Relative humidity: 15%85%, non-condensing